COPPER MOUNTAIN TECHNOLOGIES PLANAR R140 CALIBRATION and COPPER MOUNTAIN TECHNOLOGIES PLANAR R140 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the COPPER MOUNTAIN TECHNOLOGIES PLANAR R140 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Network Analyzer, SNA, VNA?
Shop for Comparable Products on our  used Network Analyzer, SNA, VNA page or new Network Analyzer, SNA, VNA page

 
   COPPER MOUNTAIN TECHNOLOGIES PLANAR R140   Description / Specification:    
COPPER MOUNTAIN TECHNOLOGIES PLANAR R140 14 GHz USB Vector Reflectometer

The Copper Mountain Planar R140 is a PC-driven vector reflectometer that operates in the frequency range from 85 MHz to 14 GHz. It is designed for use in the process of development, production, and field testing of various electronic devices in multiple environments, including operation as a component of an automated measurement system. The Planar R140 connects directly to the DUT without the use of a test cable, so there is higher calibration stability in the test setup and the cost of accessory replacement is signifi cantly decreased. Specifications. Impedance: 50 ohm (75 ohm connectors via adapters). Test port connector: N-type, male. Number of test ports: 1. Frequency range: 85 MHz to 14 GHz. Full CW frequency accuracy: ±2.5 x10 ^-6. Frequency setting resolution: 10 Hz (85 MHz to 4.8 GHz), 25 Hz (4.8 GHz to 14 GHz). Number of measurement points: 2 to 16,001. Measurement bandwidths: 100 Hz to 30 kHz (with 1/3 step). Cable loss measurement range: 35 dB (85 MHz to 4.8 GHz), 30 dB (4.8 GHz to 14 GHz). Accuracy of reflection measurements from 85 MHz to 4.8 GHz (magnitude / phase): -15 dB to 0 dB (0.4 dB / 4°), -25 dB to -15 dB (1.5 dB / 7°). Accuracy of reflection measurements from 4.8 GHz to 14 GHz (magnitude / phase): -15 dB to 0 dB (1 dB / 7°), -25 dB to -15 dB (3.0 dB / 17°). Accuracy of transmission magnitude measurements -50 dB to 0 dB: 1.0 dB (85 MHz to 4.8 GHz). Trace noise magnitude (high output power, IF bandwidth 1 kHz): 0.005 dB rms (85 MHz to 4.8 GHz), 0.050 dB rms (4.8 GHz to 14 GHz). Test Port Output power: High level -10 dBm, typ. (4.8 GHz to 14 GHz), Low level -35 dBm, typ. (85 MHz to 4.8 GHz). Damage level: +23 dBm. Measurement time per point: 200 µs.



 

Standard Calibration $730.00 *
*This is a Web introductory price for one calibration of the COPPER MOUNTAIN TECHNOLOGIES PLANAR R140. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Please contact us for your COPPER MOUNTAIN TECHNOLOGIES PLANAR R140 CALIBRATION and/or COPPER MOUNTAIN TECHNOLOGIES PLANAR R140 14 GHz USB Vector Reflectometer REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: